Siemens SIPROCESS GA700 Quick Start Manual page 34

Installing
4.1 Safety instructions for installation
NOTICE
Heat buildup due to insufficient air circulation
• Make sure that there is no buildup of heat at the installation location. Make sure that
• Do not cover the ventilation slits.
• If you install more than one rack-mounted device, maintain a clearance of one height
Note
Protect the rack-mounted device against:
• Direct thermal radiation
• Mechanical damage
• Direct sunlight
• Vibration
• Contamination
• Intrusion of dust
• Corrosive media
• Moisture
• Large and rapid temperature fluctuations
• Strong air flow
Note
The installation location should be:
• Easily accessible
• Vibration-free
• Within the ambient temperature limits
34
sufficient air circulates around the rack-mounted device.
unit (4.4 cm) to the next device.
Compact Operating Instructions, 06/2017, A5E31805656-05
Quick Start