License Plate Lamp; Replacement Bulbs - Buick 2009 Enclave Owner's Manual

License Plate Lamp

To replace one of these bulbs:
1. Remove the screws for either of the license
plate lamps.
2. Turn and pull the license plate lamp forward
through the fascia opening.
5-52
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Push the bulb straight into the socket and turn the
socket clockwise.
5. Turn and push the license plate lamp back through
the fascia opening.
6. Reinstall the screws for the license plate lamp.

Replacement Bulbs

Exterior Lamps
Back-Up Lamps
Rear Sidemarker, License Plate
Lamp, and Taillamp
Stoplamps and Taillamps
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
921
194
3057