Receiving A Call - Buick 2009 Enclave Owner's Manual

Using the Call Command
b >
1. Press and hold
responds with "Ready" followed by a tone.
2. Say "Call". The system responds with "Call using
<phone name>. Please say the name tag" followed
by a tone.
3. Say the name tag of the person to call.
•
If the system clearly recognizes the name tag it
responds with "OK, calling, <name tag>" and
dials the number.
•
If the system is unsure it recognizes the right
name tag, it confirms the name tag followed
by a tone. If the name tag is correct, say "Yes".
The system responds with "OK, calling,
<name tag>" and dials the number. If the name
tag is not correct, say "No". The system will
ask for the name tag to be re-entered.
Once connected, the person called will be heard
through the audio speakers.
3-106
for two seconds. The system
Using the Re-dial Command
b >
1. Press and hold
responds with "Ready" followed by a tone.
2. After the tone, say "Re-dial". The system responds
with "Re-dial using <phone name>" and dials the
last number called from the connected Bluetooth
phone.
Once connected, the person called will be heard
through the audio speakers.

Receiving a Call

When an incoming call is received, the audio system
mutes and a ring tone is heard in the vehicle.
b >
•
Press and begin speaking to answer the call.
c x
•
Press to ignore a call.
for two seconds. The system