Table of Contents
Advertisement
Making a Call
Calls can be made using the following commands.
Dial or Call: The dial or call command can be used
interchangeably to dial a phone number or a stored
name tag.
Digit Dial: This command allows a phone number to be
dialed by entering the digits one at a time.
Re dial: This command is used to dial the last number
used on the cell phone.
Using the Dial or Call Command
1. Press and hold
2. Say Dial or Call.
3. Say the entire number without pausing or say the
name tag.
Once connected, the person called will be heard
through the audio speakers.
Using the Digit Dial Command
The digit dial command allows a phone number to be
dialed by entering the digits one at a time. After each
digit is entered, the system repeats back the digit it
heard followed by a tone.
If an unwanted number is recognized by the system,
say Clear at any time to clear the last number.
g
for two seconds.
To hear all of the numbers recognized by the system,
say Verify at any time.
1. Press and hold
2. Say Digit Dial.
3. Say each digit, one at a time, that you want to dial.
After each digit is entered, the system repeats
back the digit it heard followed by a tone. After the
last digit has been entered, say Dial.
Once connected, the person called will be heard
through the audio speakers.
Using the Re dial Command
1. Press and hold
2. After the tone, say Re dial.
Once connected, the person called will be heard
through the audio speakers.
Receiving a Call
When an incoming call is received, the audio system
mutes and a ring tone is heard in the vehicle.
g
Press
to answer the call.
x
Press
to ignore a call.
g
for two seconds.
g
for two seconds.
4-91
Advertisement
Chapters
Table of Contents
