Advertisement
Figure 3. Memory Locations on Card Assembly
__ 10. Remove the blank filler cards from the positions where you will install the
v Install memory in sets of four. For example, you cannot fill only
positions E and G and later fill positions F and H. You must install all
four memory cards at one time.
v Pairs of memory cards must be either 128 MB, 256 MB, 512 MB, or 1 GB.
Pairs installed in E and G must match pairs installed in F and H.
memory cards by doing the following:
__ a. Push outward on the latches A that are located at each end of the
filler card, Figure 4 on page 6.
__ b. Remove the filler card from the card socket and discard it.
5
Install memory
Advertisement
