Advertisement
Figure 2. Location of card assemblies in a 270 or 810 system unit
__ 7. Remove the empty card assembly B by doing the following:
__ 8. Locate the 2884 card assembly.
__ 9. Before you remove the blank filler cards and install the memory into the
4
30xx Memory Card Installation V5R2
__ a. Unlatch the two latches on the 2884 until the card assembly slightly
"pops" out. Refer to Figure 2 C .
__ b. Pull on both latches at the same time to remove the card assembly
from the system unit.
card assembly, read the following:
v Figure 3 on page 5 shows memory card locations on the main storage
card assembly.
v Fill positions C and D before installing memory cards in positions E, F,
G, and H.
Advertisement
