Advertisement
Figure 8. Install Memory Cards
__ 27. Install the remaining memory cards.
__ 28. When you finish installing all the memory cards, turn the card assembly
__ 29. Reinstall the access cover.
__ 30. You have completed the installation of the memory cards in your system.
__ 31. Remove the processor card assembly A by doing the following:
__ 32. Remove the empty card assembly B by doing the following:
10
30xx Memory Card Installation V5R2
over, and slide it into the system unit ( C ). Push on both card latches at
the same time. Close the latches when you cannot push the card assembly
any further into the system unit.
Go to "Install system unit covers" on page 24.
__ a. Unlatch the two latches until the card assembly slightly "pops" out.
__ b. Pull on both latches at the same time to remove the card assembly
from the system unit.
__ c. Turn the card assembly over and lay it on the static protective bag.
__ a. Unlatch the two latches on the 2884 until the card assembly slightly
"pops" out. Refer to Figure 9 on page 11 B .
__ b. Pull on both latches at the same time to remove the card assembly
from the system unit.
Advertisement
