Advertisement
Figure 5. Install Memory Cards
__ 13. Remove and install the remaining memory cards.
__ 14. When you finish installing all the memory cards, turn the card assembly
__ 15. Reinstall the processor card assembly ( A in Figure 2 on page 4).
__ 16. Reinstall the access cover.
__ 17. You have completed the installation of the memory cards in your system.
__ 18. Do you already have a 2884 card assembly installed in postition B of
over, and slide it into the system unit ( B in Figure 2 on page 4). Push on
both card latches at the same time. Close the latches when you cannot
push the card assembly any further into the system unit.
Go to "Install system unit covers" on page 24.
Figure 6 on page 8 in your model 820?
7
Install memory
Advertisement
