Advertisement
Figure 9. Location of card assemblies in 820 system unit
__ 33. Locate the new 2884 card assembly.
__ 34. Before you remove the blank filler cards and install the memory into the
card assembly, read the following:
v Figure 10 on page 12 shows memory card locations on the main storage
card assembly.
v Fill positions C and D before installing memory cards in positions E, F,
G, and H.
v Install memory in sets of four. For example, you cannot fill only
positions E and G and later fill positions F and H. You must install all
four memory cards at one time.
v Pairs of memory cards must be either 128 MB, 256 MB, 512 MB, or 1 GB.
Pairs installed in E and G must match pairs installed in F and H.
11
Install memory
Advertisement
