Advertisement
__ b. Press the Increment/Decrement push button until 02 appears
in the Function/Data display.
__ c. Press the Enter push button on the control panel.
__ d. Press the Increment/Decrement push button until B appears in
the Function/Data display.
__ e. Press the Enter push button on the control panel.
__ f. Press the Increment/Decrement push button until S appears in
the Function/Data display.
__ g. Press the Enter push button on the control panel.
__ h. Press the Mode Select button until the Normal indicator (OK)
lights up.
__ i. Press the Increment/Decrement push button until 01 appears
in the Function/Data display.
__ j. Press the Enter push button on the control panel.
01 B S should appear in the Function/Display panel. If it does
not appear, repeat steps 5a on page 26 through 5i.
__ k. Go to step 6.
__ 6. Power on the workstation or PC that is your console.
__ 7. Press the system unit power-on button. The power-on light will appear.
Note: There will be an approximately 10-second delay before power on.
The system takes approximately 5 to 20 minutes to power on and
complete an IPL.
__ 8. Sign on the system unit. Ensure that you have service tools authority.
__ 9. To verify your memory (main storage) card configuration, do the following:
__ a. Type strsst on the command line and press Enter.
__ b. Type your service tools user ID and service tools password on
the System Service Tools (SST) Sign On display and press Enter.
__ c. Select Start a service tool on the System Service Tools (SST) display
and press Enter.
__ d. Select Hardware service manager on the Start a Service Tool display
and press Enter.
__ e. Select Logical hardware resources (Buses, IOPs, Controllers...) from
the Hardware Service Manager display and press Enter.
__ f. Select Main Storage Resources on the Logical Hardware Resources
display and press Enter.
Verify that the status is Operational for all locations.
Note: If the status is not Operational, check the memory cards.
__ g. If you have a printer, print the configuration list.
Note: To print the hardware resources list, press F12 one time. When
the Logical Hardware Resources menu appears, press F6.
__ h. To return to the Main Menu, press F3 three times and then press
Enter.
__ 10. If you changed the value of the System performance adjustment option in step
1 on page 2, do the following to return to what you had prior to your
upgrade:
__ a. On an iSeries command line, type WRKSYSVAL (QPFRADJ).
27
Install memory
Advertisement
