13 SERVICE WORK ON THE CHASSIS
13.18
13.19
54
H01428-11
Removing the shock absorber
M01672-10
Installing the shock absorber
Warning
Danger of accidents Modifications to the suspension setting may seriously alter the handling characteris-
tic.
–
Ride slowly to start with after making adjustments to get the feel of the new handling characteristic.
M01672-11
–
Position front fender. Mount and tighten screws
Guideline
Screw, fender
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Note the installation position of the shock absorber.
–
1
Pull brake line
out of the holder.
–
2
Remove screw
and lower the link fork carefully.
–
3
Remove screw
, push splash protector
remove the shock absorber.
Main work
–
1
Push splash protector
–
Mount the shock absorber with screw
Guideline
If necessary, observe the installation position noted during
removal.
Screw, top
M10
shock absorber
–
Lift the link fork, mount screw
Guideline
Screw, bottom
M10
shock absorber
–
4
Attach brake line
to the holder.
Finishing work
–
Remove the motorcycle from the lift stand. (
2
.
M6
6 Nm (4.4 lbf ft)
p. 45)
4
to the side, and
to the side.
2
.
45 Nm (33.2 lbf ft)
Loctite
3
and tighten it.
45 Nm (33.2 lbf ft)
Loctite
p. 45)
®
243™
®
243™