13.10
Installing the lower triple clamp
–
Remove protective ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
M01668-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing
–
Check that the O-ring at the top
–
Push on protective ring
F02885-10
–
Position the upper triple clamp with the handlebar.
–
4
Mount nut
M01667-11
SERVICE WORK ON THE CHASSIS 13
3
.
p. 99)
1
.
2
is correctly positioned.
3
.
, but do not tighten it yet.
49