15.3
Removing the rear wheel
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease the contact surfaces
Long-life grease (
–
Insert the spacers.
H01198-10
–
Clean and grease the wheel spindle.
Long-life grease (
–
Position the front wheel.
The brake linings are correctly positioned.
–
Insert the wheel spindle.
M01698-11
–
Mount and tighten screw
Guideline
Screw, front
wheel spindle
–
Operate the hand brake lever several times until the brake lin-
ings are seated correctly against the brake disc.
–
Remove the motorcycle from the lift stand. (
–
Operate the front brake and compress the fork a few times
M01697-10
firmly.
The fork legs straighten.
–
Tighten screws
Guideline
Screw, fork stub
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Remove nut
–
Take off chain adjuster
F02209-10
A
p. 99)
p. 99)
1
.
M10
40 Nm (29.5 lbf ft)
2
.
M6
1
.
2
.
WHEELS, TIRES 15
of the spacers.
Loctite
®
243™
p. 45)
10 Nm (7.4 lbf ft)
p. 45)
77