Statistics Operation - UNI-T UT8805E Manual

2.8.1 Statistics Operation

Statistics operation can be applied to measure the minimum, maximum, average, standard deviation of
reading during the measurements of DC/AC voltage, DC/AC current, resistance, frequency, cycle,
capacitance and temperature.
→ [Stat] → [On] to enter the interface of Figure 2-42.
Press
Menu of statistics operation
Function menu Options
Stat On/Off
Min
Average
Max
Span
Std Dev
Samples
Clear
Done
Statistics operating method:
In statistics operation, the beginning reading of multimeter is displayed as maximum/minimum, and then
the minimum/maximum value of current readings will be displayed. The minimum, maximum, average
and reading numbers are saved in volatile memory and will be auto deleted after power off.
Figure 2-42 Interface of statistics operation
Description
Display or hide the statistics operating interface
The minimum reading during measurements
The average of readings during measurements
The maximum reading during measurements
The span of readings during measurements
The standard deviation of readings during measurements
The number of samples during measurements
Clear current data and restart the statistic
Save current settings and return to previous menu
36
UT8805E Benchtop Digital Multimeter