Chapter 1 Quick Start; General Checking; Handle Adjustment - UNI-T UT8805E Manual

Chapter 1 Quick start

This chapter is a simple guide of preparation before using, the front/real panel and interfaces of UT8805E
digital multimeter.

1.1 General Checking

1) Checking for any damage in transit
Keep the package if the packing carton or foamed plastic cushion is seriously damaged, until the
multimeter and accessories pass the electric and mechanical inspections. Contact distributor or local
representative office immediately if any abnormality is found.
2) Accessories checking
The accessories list is provided in appendix A of chapter 6. User can check refer to this list. Contact
distributor or local representative office immediately if any accessory is missing or damaged.
3) Complete instrument checking
Contact distributor or local representative office immediately if any abnormal operation or
appearance damage is found.

1.2 Handle Adjustment

To adjust the handle of multimeter, please hold the handle by both sides, pull outward, and rotate it as
needed, see Figure 1-1 and 1-2.
Figure 1-2 Lying position
Figure 1-1 Handle adjustment
9
UT8805E Benchtop Digital Multimeter
Figure 1-3 Moving position