System Settings - UNI-T UT8805E Manual


RS-232C Setting
By setting RS-232C Uart, make sure the settings of baud rate, parity and stop bit are match with the
computer setting. The setting of Uart is saved in non-volatile memory.
Steps:
1) Press [Uart] button after opening the interfaces setting menu:
2) Value can be modified by direction buttons. The current settings are saved in non-volatile memory.
Functio
Options
n menu
9600 (default), 14400, 19200, 38400,
Baud
56000, 57600, 115200, 128000,
rate
256000
Parity None (default), Odd, Even
Stop bit 1bit, 1.5bit, 2bit
Return
When the parity is:
None: the bit of upper computer should be 8 bits
Odd/even parity: the bit of upper computer should be 7 bits

2.5.2 System Settings

press button, then press
Description of System setting menu
Figure 2-34 RS-232C
button，select [System] to enter the interface as Figure2-35.
Figure 2-35 Interface of system setting
Description
Set baud rate of RS-232C operation
Set parity of RS-232C operation
Set stop bit of RS-232C operation
Save current setting and return to
previous menu
30
UT8805E Benchtop Digital Multimeter