Brazil Notification; Italy Notification; Labeling And Disclosure Table For China - Cambium Networks PMP 400 Series Configuration And User's Manual

PMP 400/430 and PTP 200/230 Series Configuration and User Guide

Brazil Notification

Brazil regulatory authorities have not approved these devices for operation in Brazil. Until they are
approved, they are not available for sale in Brazil, and the information in this section is provisional
and preliminary.
For compliant operation in the 5.4 GHz band, the Equivalent Isotropic Radiated Power from the integrated
antenna or connectorized antenna must not exceed 27 dBm (0.5 W).
The operator is responsible for enabling the DFS feature on any Canopy 5.4 GHz radio by setting the
Region Code to "Brazil", including after the module is reset to factory defaults.
Important Note: This equipment operates as a secondary application, so it has no rights against harmful
interference, even if generated by similar equipment, and cannot cause harmful interference on systems
operating as primary applications.

Italy Notification

In Italy, there is a regulation which requires a general authorization of any 5.4 GHz radio link which is used
outside the operator's own premises. It is the responsibility of the installer or operator to have the link
authorized. For details, see:
http://www.sviluppoeconomico.gov.it/index.php?option=com_content&view=article&idmenu=672&idarea1=5
93&andor=AND&idarea2=1052&id=68433&sectionid=1,16&viewType=1&showMenu=1&showCat=1&idarea
3=0&andorcat=AND&partebassaType=0&idareaCalendario1=0&MvediT=1&idarea4=0&showArchiveNewsB
otton=0&directionidUser=0
The form to be used for general authorization may be found at:
http://www.sviluppoeconomico.gov.it/images/stories/mise_extra/Allegato%20n19.doc

Labeling and Disclosure Table for China

The People's Republic of China requires that Cambium's products comply with China Management Methods
(CMM) environmental regulations. (China Management Methods refers to the regulation Management
Methods for Controlling Pollution by Electronic Information Products.) Two items are used to demonstrate
compliance; the label and the disclosure table.
The label is placed in a customer visible position on the product.

Logo 1 means that the product contains no substances in excess of the maximum concentration
value for materials identified in the China Management Methods regulation.

Logo 2 means that the product may contain substances in excess of the maximum concentration
value for materials identified in the China Management Methods regulation, and has an
Environmental Friendly Use Period (EFUP) in years, fifty years in the example shown.
Logo 1
The Environmental Friendly Use Period (EFUP) is the period (in years) during which the Toxic and
Hazardous Substances (T&HS) contained in the Electronic Information Product (EIP) will not leak or mutate
causing environmental pollution or bodily injury from the use of the EIP. The EFUP indicated by the Logo 2
label applies to a product and all its parts. Certain field-replaceable parts, such as battery modules, can
have a different EFUP and are marked separately.
The Disclosure Table (see
it is not intended to communicate compliance with EU RoHS or any other environmental requirements.
pmp-0042 (March 2014)
Table 29) is intended only to communicate compliance with China requirements;
Logo 2
Page 92 of 98