Table 7: Ancillary Equipment And Model Numbers - Cambium Networks PMP 400 Series Configuration And User's Manual

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
Table 7 lists various ancillary equipment and model numbers.

Table 7: Ancillary Equipment and Model Numbers

Name
Cluster Management Module micro
(CMMmicro – 30 VDC power supply)
 Controller and 8-port embedded switch
 Outdoor enclosure for controller and
switch (but not power supply)
 30 VDC power supply included with two
models (with 10 ft (3m) DC cable)
 GPS antenna and mounting bracket
CMMmicro or CMM4 30 VDC power supply
(w 10 ft DC cable)
(3 m)
PMP 400/430 5.8 & 5.4 GHz SM 29.5 VDC
power supply
(also for isolated 5.4 GHz AP or BH)
 Includes 6 ft (2m) DC cord
 No AC cord needed (plugs directly
into AC receptacle)
 Canopy-proprietary PoE (differs
from IEEE 803.3af)
pmp-0042 (March 2014)
Model or Part Number
1070CKHH (with N. American AC
cord for power supply)
1070CK-02HH (no AC cord)
1070CK-03HH (no power supply)
ACPS120WA (with N. American AC
cord for power supply)
APCS120W-02A (no AC cord)
ACPSSW-09B (US, UK, Euro clips)
ACPSSW-13B (N. America)
ACPSSW-10C (Argentina)
ACPWWS-11C (China)
ACPSSW-12A (Australia)
ACPSSW-14A (Brazil)
ACPSSW-20A (Infrastructure Grade,
US, UK, EU clips)
ACPSSW-21B (Infrastructure Grade,
C8 clip to allow AC cord)
Typically use with
C C P C C P C
A S T A S T A
P M P P M P P
5 5 5 5 5 5 4
x x x 4 4 4 9
4 4 2 4 4 2 4
3 3 3 0 0 0 0
0 0 0 0 0 0 0
X X
X X X
X X
C
P
S
T
M
P
4
4
9
9
2
4
0
0
0
0
Page 25 of 98