Procedure 3: Assembling A 5.8 Or 5.4 Ghz Ap, And Attaching To Tower - Cambium Networks PMP 400 Series Configuration And User's Manual

PMP 400/430 and PTP 200/230 Series Configuration and User Guide

Procedure 3: Assembling a 5.8 or 5.4 GHz AP, and attaching to tower

1.
Perform a parts check to ensure all
parts are present.
2.
Assemble the upper bracket, per the
diagram that comes with the antenna.
3.
Connect the radio to the antenna by
sliding it into the captive space. Secure
the radio to the antenna using the two
bolts provided.
4.
Assemble the lower bracket on the
antenna assembly.
Although it may seem intuitive to attach
both brackets to the tower or pole and
then hang the antenna, it usually works
better to have the bottom bracket
already attached to the antenna before
climbing.
5.
Weatherproof the connector with
waterproof wrap.
pmp-0042 (March 2014) Page 78 of 98