Table 19 Interoperability Configuration Options - Cambium Networks PMP 400 Series Configuration And User's Manual

PMP 400/430 and PTP 200/230 Series Configuration and User Guide

Table 19 Interoperability configuration options

AP Registration Option
PMP 430
PMP 450 Interoperability Mode
Both
The PMP 430 SM will only register to a PMP 450 AP at 1/16
Since PMP 430 SM cannot scan multiple channel bandwidths without reboot, the color code, channel
bandwidth and encryption must match that of the PMP 450 AP. A PMP 430 SM can set encryption to
"NONE" to slave to an AP's encryption.
A default plug may be necessary to upgrade an SM that is not registered to an AP, if both "AP
Registration" options are selected.
pmp-0042 (March 2014)
Description
The SM will only register to a PMP 430 AP
The SM will only register to a PMP 450 AP
When the SM is first upgraded to 12.2, it will try to register to a PMP
430 AP. Then after 10 minutes it will try to register to a PMP 450 AP.
If the SM does not successfully connect to an AP it will reboot into the
other radio mode. If after 10 minutes in that radio mode the SM cannot
connect to an AP, it will switch radio modes again. This will repeat until
an AP is found. In addition, the PMP 430 SM can be forced to reboot
and switch to the other radio mode.
th
Cyclic Prefix.
Page 64 of 98