Figure 34 Power Tab; Figure 35 Configuration Tab - Cambium Networks PMP 400 Series Configuration And User's Manual

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
Power Tab
The Power tab provides information on the SMs Hardware State, Current Rate, AP Rx Power, Signal
Strength Ratio, and Signal to Noise ratio as shown in Figure 34.

Figure 34 Power tab

Configuration Tab
The Configuration tab provides information on the SMs Uplink or Downlink (UL/DL) Sustained Data Rate,
UL/DL Burst Allocation, UL/DL Burst Rate, UL/DL Low Priority CIR, UL/DL High CIR, UL/DL High Priority
Queue Information and the UL/DL Broadcast or Multicast Allocation, as shown in Figure 35. This data is
refreshed based on the Web Page Auto Update setting on the AP's General Configuration page.

Figure 35 Configuration tab

pmp-0042 (March 2014) Page 67 of 98