Table 6: Cmm4 56Vdc And 30 Vdc Operation - Cambium Networks PMP 400 Series Configuration And User's Manual

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
4.9 GHz OFDM Connectorized
4940APC
AP – No antenna
4.9 GHz OFDM Connectorized
4941APC
AP – No antenna
PTP 49200
4.9 GHz OFDM Backhaul (BH)
Model
Description
Number
4940BH 4.9 GHz OFDM BH
4941BH 4.9 GHz OFDM BH
4.9 GHz OFDM Connectorized
4940BHC
BH – No antenna
4.9 GHz OFDM Connectorized
4941BHC
BH – No antenna
A Cluster Management Module (CMM4) provides GPS synchronization and power to the PMP 400/430 and
PTP 200/230 series of products:

Table 6: CMM4 56VDC and 30 VDC Operation

Frequency PMP Series Access
PMP 430 Series – CAP
58430
5.8 GHz
5.4 GHz PMP 400 Series – CAP
54400
PMP 430 Series – CAP
54430
4.9 GHz PMP 400 Series – CAP
49400
The CMM4 can be configured with either or both a 56VDC and a 30VDC external power supply as shown in
Figure 10 and Figure 11. The CMM4 must be used for 56 VDC operations which are required for the PMP
430 5.4 and 5.8 GHz AP, and PMP 400 4.9-GHz AP. The CMMmicro only supports 30 VDC operations.
pmp-0042 (March 2014)
DES
AES
Encryption
DES
AES
DES
AES
Table 6 details the power requirements of the APs and BHs.
PTP 230 Series
Point (AP) Backhaul (BH)
PTP 230 Series –
PTP 58230
PTP 200 Series –
PTP 54200
PTP 230 Series –
PTP 54230
PTP 200 Series –
PTP 49200
Requires CMM4
w/56 VDC supply
Requires CMM4
w/56 VDC supply
Power 56 VDC
Picture
CMM Type
Wall type 56VDC
supply or CMM4
w/56 VDC supply
Wall type 56VDC
supply or CMM4
w/56 VDC supply
Wall type 56VDC
supply or CMM4
w/56 VDC supply
Wall type 56VDC
supply or CMM4
w/56 VDC supply
Canopy Custom Power over
Ethernet (PoE)
56 VDC - power on pins 7 and 8
and return on pins 4 and 5
30 VDC - power on pins 7 and 8
and return on pins 4 and 5
30 VDC - power on pins 7 and 8
and return on pins 4 and 5
56 VDC - power on pins 7 and 8
and return on pins 4 and 5
56 VDC - Power on pins 5 & 8,
return on pins 4 & 7
Page 22 of 98