Specifications - Cambium Networks PMP 400 Series Configuration And User's Manual

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
Wireless Manager is used to manage and monitor Canopy modules. However; the standalone CNUT tool
must be used to upgrade radio software.
CNUT 3.20.19 (Canopy Network Updater Tool) is the stand-alone software update tool for PMP 400/430 and
PTP 200/230 Series products.. CNUT is available at
"Management Tools".
PMP 400/430 and PTP 200/230 equipment may also be managed by SNMP queries based on the Canopy
MIB (Management Information Base) objects.
Release 11.0 adds support for RADIUS (Remote Authentication Dial In User Service) protocol supporting:

SM Authentication allows only known SMs onto the network (blocking "rogue" SMs), and can
be configured to ensure SMs are connecting to a known network (preventing SMs from
connecting to "rogue"
BHMs, or BHSs.

SM Configuration configures authenticated SMs with MIR (Maximum Information Rate), CIR
(Committed Information Rate), High Priority, and VLAN (Virtual LAN) parameters from the
RADIUS server when an SM registers to an AP.

Centralized AP and SM user name and password management allows AP and SM
usernames and access levels (Administrator, Installer, Technician) to be centrally administered
in the RADIUS server instead of on each radio and tracks access events (logon/logoff) for
each username on the RADIUS server. BHMs and BHSs do not support RADIUS accounting.
This accounting does not track and report specific configuration actions performed on radios or
pull statistics such as bit counts from the radios. Such functions require an
Management System (EMS) such as Cambium Wireless Manager. This accounting is not the
ability to perform accounting functions on the subscriber/end user/customer account.

Specifications

PMP 430 (5.4 and 5.8 GHz) products are sold in the following formats:

SM - Radio with integrated antenna

AP - Kitted, connectorized radio (antenna included)

AP – Connectorized radio (antenna provided by operator)
PMP 400 (5.4 and 4.9-GHz) and PTP 200 (5.4 and 4.9-GHz) products are sold in the following formats:

SM/BH - Radio with integrated antenna

AP/SM/BH - Connectorized radio (antenna provided by operator)

AP - Kitted, connectorized radio (antenna included)
PTP 230 (5.4 and 5.8 GHz) products are sold in the following format:

SM/BH - Radio with integrated antenna
The specifications for each format are listed in the following sections.
pmp-0042 (March 2014)
http://www.cambiumnetworks.com/support
A
Ps). RADIUS authentication is used for SMs, but not used for APs,
under
E
lement
Page 32 of 98