20361 22 Inch Recycler Power Head Assembly Replacement - Toro 20363 Service Manual

20363 with Personal Pace 22 inch Recycler Power Head Assembly Installation (continued)

20361 22 inch Recycler Power Head Assembly Replacement

20361 22 inch Recycler Power Head Assembly Removal
20361 22 inch Recycler Power Head Assembly Installation
60v WPM Service Manual
3429-828 Rev A
g295229
8. Install the blade to the machine. Secure with the blade bolt. Torque blade
bolt to 50 ft-lbs. (68 Nm).
9. Install the harness anchor onto the power head.
10. Install the harness to the power head.
11. Connect the brake cable to the power head.
12. Install the brake cable to the bail and power head assembly.
1. Park the machine on a level surface and set the parking brake. Stop the
motor, wait for all moving parts to stop and remove the key.
2. Remove the brake cable from the bail and power head assembly.
3. Disconnect the brake cable from the power head.
4. Remove the blade from the machine.
5. Remove the 3 (1/2 inch) power head mounting bolts from the machine.
6. Remove the zip tie. Disconnect the power cord from the power head
assembly.
7. Remove the power head assembly from the machine.
1. Using an appropriate lifting device with the machine on it's side, support the
motor. Install the 3 (1/2 inch) motor mount bolts securing the motor to the
chassis. Torque motor mount bolts to 450 in-lbs. (50.8 Nm).
2. Connect the power cord to the power head to the power head assembly.
Secure power cord to the chassis with a zip tie.
Figure 17
Page 4–11 Power Head Assembly: Service and Repairs