Power Head Shroud Upper Replacement - Toro 20363 Service Manual

Power Head Shroud Upper Replacement

Power Head Shroud Upper Removal
Power Head Shroud Upper Installation
Shrouds: Service and Repairs
1. Remove the battery from the power head assembly.
2. Remove the 8 (6 top-around the battery cavity and 2 on the bottom rear) (1/4
x 1.0 inch) flange screws securing the power head upper shroud to the lower
shroud. Remove the power head upper shroud.
g293756
Install the power head upper shroud to the lower shroud. Secure with 8 (6
top-around the battery cavity and 2 on the bottom rear). Torque screws to 30
± 3 in-lbs. (3.39 Nm).
g293756
Figure 30
Figure 31
Page 7–4 60v WPM Service Manual
3429-828 Rev A