Electrical Drawing Abbreviations - Toro 20363 Service Manual

Electrical Drawing Abbreviations

Foldout Drawings
The following abbreviations are used for wire harness colors on the electrical
schematics and wire harness drawings in this chapter.
Abbreviation
BK
BR or BM
BU
GN
GY
OR
PK
R or RD
T
VIO
W or WH
Y or YE
Numerous harness wires include a line with an alternate color. These wires are
identified with the wire color followed by a / or _ and then the line color (e.g, R/BK
is a red wire with a black line; OR_BK is an orange wire with a black line).
Note: The electrical harness drawings in this chapter identify both the wire color
and the wire gauge. For example, 16 BK on a harness diagram identifies a
16 gauge wire with black insulation.
Note: A splice used in a wire harness will be identified on the wire harness
diagram by SP. The manufacturing number of the splice is also identified on the
wire harness diagram (e.g., SP01 is splice number 1).
Page A–2
Color
Black
Brown
Blue
Green
Gray
Orange
Pink
Red
Tan
Violet
White
Yellow
60v WPM Service Manual
3429-828 Rev A