Setting The Direct Mode Setup; Check The Eq Parameter - Denon AVR-2106 Operating Instructions Manual

ENGLISH
Advanced Setup – Part 2
• The Equalizer setting of "Normal", "Flat" and "Front" can be
selected after performing the Auto Setup.
• When the speaker set as "None" with the Auto Setup is
change to on manually, the equalizer of "Normal", "Front" and
"Flat" cannot be used.
• The Equalizer setting can be selected by SURROUND
PARAMETER button.
• When headphone is connected, the Room EQ cannot be used.

Setting the Direct Mode Setup

Perform the ON/OFF setting of Room EQ when the surround
mode is "Direct" or "Pure Direct".
1 CURSOR D D
Press the or
"Direct Mode Setup" at the "Auto Setup/Room
EQ" menu, then press the
• The "Direct Mode Setup" screen appears.
2 CURSOR F F G G
Press the or
or "OFF".
3
ENTER
Press the button to enter the setting.
• The "Auto Setup/Room EQ" menu appears.

Check the EQ parameter

• The frequency characteristic of each speaker is rectified and
the tone of the speaker is unified.
• The EQ parameters that were set in Auto Setup can be
checked.
• This item is automatically displayed, after the measurement
result of the "Auto Setup/Room EQ" is decided.
1
Press the
Parameter Check" at the "Auto Setup/ Room
EQ" menu, then press the
• The "EQ Parameter Check" screen appears.
H H
button to select
ENTER
button.
2
Press the
equalizer curve, then press the
• The parameter screen appears.
button to select "ON"
3
Press the
speaker channel.
4
Press the
CURSOR D D H H
or button to select "EQ
ENTER
button.
CURSOR D D H H
or button to select the
ENTER
button.
CURSOR F F G G
or button to select the
ENTER
button to enter the setting.
53
ENGLISH
Advanced Setup – Part 2
5
If the check ends, press the
button to select "Exit", then press the
button.
• The "Auto Setup/Room EQ" menu appears.
6
CURSOR D D H H
Press the or
ENTER
"Exit", then press the
• The "System Setup" menu appears.
CURSOR D D H H
or
ENTER
button to select
button.