Room Eq Setting; Buttons - Denon AVR-2106 Operating Instructions Manual

Basic Operation

Room EQ setting

2 Operate the Room EQ from the remote control
unit
1
SURROUND PARAMETER
Press the
• The surround parameter screen appears.
2
CURSOR D D H H
Press the or button to select "Room
EQ".
3 CURSOR F F G G
Press the or button to select the
equalizer setting.
OFF Normal
Manual Flat Front
4
ENTER
Press the button to finish surround
parameter mode.
• The equalizer setting of Normal, Flat, and Front can be selected
after performing the Auto Setup.
• When headphone is connected, the Room EQ cannot be used.
2 Operate the Room EQ from the main unit
1 SURROUND PARAMETER
Press the
• The surround parameter screen is appears.
button.
2
SURROUND PARAMETER
Press the
select "Room EQ".
3 SELECT
Turn the
setting.
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
2 Surround parameters r
ROOM SIZE:
button.
EFFECT LEVEL:
DELAY TIME:
button to
TONE CONTROL:
ROOM EQ:
• OFF:
• Normal:
knob to select the equalizer
• Flat:
• Front:
• Manual:
28
ENGLISH
This sets the size of the sound field.
There are five settings: "small", "med.s" (medium-small),
"medium", "med.l" (medium-large) and "large". "small"
recreates a small sound field, "large" a large sound field.
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. Lower the level
if the sound seems distorted.
The delay time can be set within the range of 0 to 110 ms only
in the matrix mode.
This can be set individually for each surround mode except
PURE DIRECT and DIRECT.
This sets the frequency response of each speaker.
The Equalizer is not used.
Adjust the frequency response of all speaker suitable for
general surround system.
Adjust the frequency response of all speakers flat.
Adjusts the characteristics of each speaker to the
characteristics of the front speakers.
Selects the setting value that was set in the Manual EQ setup.
ENGLISH
Basic Operation