Auto Surround Mode; Room Eq Setup; Direct Mode Setup; Remote Id Setup - Denon AVR-1508 Owner's Manual

ENGLISH
f Auto Surround Mode
Make setting for memorizing surround mode setting for each input
signal type.
[Display]
1 . S p 2 . I n 3 . O p
O p t i o n S e t u p
4 A u t o S u r r . O N
[Selectable items]
ON
: Memorize settings. Most recently stored surround mode is
automatically selected.
OFF
: Do not memorize settings. Surround mode does not change
according to input signal.
The auto surround mode function lets you store in the memory the
surround mode last used for playing the three types of input signals
listed below.
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals of Dolby Digital, DTS or other multi-channel
format (DOLBY PLgx Cinema)
e Multi-channel signals of Dolby Digital, DTS or other multichannel
format (DOLBY/DTS SURROUND)
b Default settings are indicated in ( ).

Operations
(vpage 21)
g Room EQ Setup
Select room EQ setting method.
[Display]
1 . S p 2 . I n
O p t i o n S e t u p
E
E
[Selectable items]
All
: Apply settings to all surround modes.
Assign
: Make settings for each surround mode separately.
h Direct Mode Setup
Select room EQ use for DIRECT mode.
[Display]
1 . S p 2 . I n
O p t i o n S e t u p
[Selectable items]
ON
: Use room EQ.
OFF
: Do not use room EQ.
3 . O p
E
E
5 E Q A l l
3 . O p
E
E
6 D i r e c t O F F
j Remote ID Setup
Set remote control ID.
[Display]
1 . S p 2 . I n 3 . O p
O p t i o n S e t u p
7 R e m o t e I D 1
[Selectable items] 1 2 3
NOTE
When using the AVR-1508 with only the included remote control unit
(RC-1076), there is no need to make settings.
When using a separately sold remote control unit (RC-7000CI, etc.),
this function can be used. Match the ID setting of the remote control
unit and the receiver.
E
E
4