The Video Conversion Function; On Screen Display Signals - Denon AVR-2106 Operating Instructions Manual

Connecting Other Sources

The video conversion function

With the AVR-2106, the Video signal and the S-Video signal which
were inputted are mutually converted. And also the Video signal
and the S-Video signal which were inputted are converted into a
higher quality.
The flow of the video signals.
(Component video
terminals)
(S-Video terminal)
(Video terminal)
This unit's input This unit's output
terminals
Cautions on the video conversion function:
When the component video terminals are used to connect the
AVR-2106 with a TV (or monitor, projector, etc.) and the video
(yellow) or S-Video terminals are used to connect the AVR-
2106 with a VTR, depending on the combination of the TV and
VTR the picture may flicker in the horizontal direction, be
distorted, be out of sync not display at all when playing video
tapes.
If this happens, connect a commercially available video
stabilizer, etc., with a TBC (time base corrector) function
between the AVR-2106 and the VTR, or if your VTR has a TBC
function, turn it on.

On screen display signals

Signals input to the AVR-2106
VIDEO signal
input terminal
(yellow)
E
1
2 C
3 E
(Component video
4 C
terminals)
(C: Signal
(S-Video terminal)
(Video terminal)
terminals
Video signal output to
S-Video signal
VIDEO MONITOR OUT
input terminal
terminal (yellow)
E C
E C
C C
C E
E: No signal) (C: On screen signals output
12
ENGLISH
Connecting Other Sources
On screen display signal output
Video signal output to Video signal output to Color
S-Video MONITOR OUT Difference (Component) Video
terminal MONITOR OUT terminal
C
C
C
C
E: On screen signals not output)
ENGLISH
C
C
C
C