Pc Monitor Mode; Connecting A Pc - Grundig VISION 7 Manual

CHANNEL SETUP
Auto position
H Position
V Position
Clock
Fase
Select
Back
36

PC MONITOR MODE

Connecting a PC

1
Connect the socket
sponding socket on the PC using a VGA cable.
2
Connect the socket
corresponding socket on the PC using a cinch cable (audio
signal).
Note:
Adjust your PC to the monitor (for example, picture resolution
1280 x 768, picture frequency 60 Hz).
Selecting the channel position for the PC
1
Press »AV«, select the »PC« channel with »
»G« to confirm.
Settings for the PC
1
Press »i« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
2
Select »Channel setup« with »
firm.
3
Select the function or setting you want with »
–
» « or »
– Options:
»Auto position« For automatic PC configuration;
»H. Position«
Exit
»V. Position«
»Clock«
»Phase«
4
Press »i« to exit the »CHANNEL SETUP« menu.
VGA« on the television to the corre-
»PC-IN
AUDIO-IN« on the television to the
»PC
Λ
+
« to execute it.
Adjust the picture position horizontally;
Adjust the picture position vertically;
Set the cycle frequency;
Remove horizontal flicker, blurring and hori-
zontal lines.
----------------------------------------------------------
Λ « or » V « and press
« or » V « and press »G« to con-
Λ « or » V « and press