Tuning Analogue Television Stations - Grundig VISION 7 Manual

CHANNEL SETUP
System BG
Channel C 03
Fine tuning 0
a s
Search
Program no P01
Store
Autoprogram
G G
0 - 9
Exit
Back
CHANNEL SETUP
System BG
Channel C 03
Fine tuning 0
a s
Search
Program no P01
Store
Autoprogram
Search
Exit
Back
CHANNEL SETUP
System BG
Channel C 03
Fine tuning 0
a s
Search
Program no P01
Store
Autoprogram
Store
Exit
Back
SPECIAL SETTINGS

Tuning analogue television stations

These settings are only necessary if you can not receive digital
stations. The television channel can be set directly or using the
search.
Switching the television to analogue channels
1
Open the »SOURCE TABLE« menu by pressing »AV«.
2
Select the »ANALOG TV« signal source with »
press »G« to confirm.
Note:
Additional operations are explained in the following sections.
Setting channels using the search
1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2
Select »Channel setup« with »
– The »CHANNEL SETUP« menu appears.
3
Select »Program no« with »
–
nel with » « or »
4
Select »Search« with »
+
or » «.
– If a strong station signal is received, the search is interrupted
and the picture appears. Repeat the search until the channel
you want appears on the screen.
Note:
The current system is automatically displayed in the »System« line.
Select »System« with »
correct. Select the setting required with »
5
Select »Store« with »
– The »Stored« message appears.
Note:
To set other television stations, repeat steps
6
Press »i« to finish the setting.
------------------------------------------------------------------
Λ « or » V
Λ V
« or » « and set the preset chan-
+
«.
Λ « or » V « and start the search with »
Λ « or » V « if the colour or sound are in-
Λ V
« or » « and confirm with »
Λ V
« or » « and
« and confirm with »G«.
–
– +
« or » «.
– +
« or » «.
3 to 5.
«
39