Pip Mode - Grundig VISION 7 Manual

TELEVISION OPERATION

PIP mode

PIP (picture in picture) allows you to watch an inset picture from a sec-
ond picture source in addition to the current channel.
DVD players, video recorders or satellite receivers can be used as
video sources. They must be connected to the input sockets on the
back of the device.
Selecting AV channels
1
Call up the »SOURCE TABLE« menu with »AV«.
2
Select the desired AV channel position with »
press »G« to confirm.
Displaying the inset picture
1
To display the inset picture, press »PIP« once.
Double window
1
To activate the double window function (split screen), keep press-
ing »PIP«.
– The last selected main and inset pictures are shown next to
each other.
Selecting the channels for the inset picture and
the left side of the screen (double window)
1
Λ
Press » « or »
at a time.
Selecting the channels for the main picture and
the right side of the screen (double window)
1
Select the picture source (DVD player, video recorder, SAT
receiver), then call up the »SOURCE TABLE« menu with »AV«,
select the desired AV pre set with »
pressing »G«.
Swapping the main and inset pictures
1
Press »Z« to swap the main and inset pictures.
Changing the position of the inset picture
1
Press »P« to move the inset picture.
Changing the size of the inset picture
1
Press »S« to change the size of the inset picture.
Ending the PIP function
1
To hide the inset picture, press »PIP« twice.
Quitting the double window
1
To quit the double window, press »PIP«.
V
« to move up and down channel positions one
Λ
------------------------------------------
Λ « or » V « and
« or » V « and confirm by
23