Operation With Common Interface; Inserting The Common Interface Module; Access Control For Ci Module And Smart Card - Grundig VISION 7 Manual

IDTV SETTINGS
Language Settings
Time Settings
Parental Control
No CA-Module
CA - Module
Signal Information
Software Update
1.1.4
Version
Back
Select and Open
Exit

OPERATION WITH COMMON INTERFACE

Inserting the Common Interface module

Note:
Switch off the appliance before inserting the CI module in the
»CI« slot.
1
Insert the smart card into the CI module.
2
Insert the CI module with the smart card into the »CI« slot on the
television.
Note:
To see which CI module is in the Common Interface slot, go to the
»CA - Module« submenu.

Access control for CI module and smart card

1
Open the »MAIN MENU« menu with »i«.
2
Select »Features« with »
3
Select »IDTV Settings« with »
confirm.
4
Select »CA - Module« with »
confirm.
Notes:
This menu give operating instructions and – after you enter your
PIN code – access to channels of the PAY-TV provider.
The remaining settings are described in the manuals for your CI
module and smart card.
5
Press »i« to end the setting.
Λ « or » V « and press »G« to confirm.
Λ « or » V « and press »G« to
Λ « or » V « and press »G« to
37