Pc Monitor Mode; Connecting A Pc; Selecting The Channel Position For The Pc; Settings For The Pc - Grundig VISION 6 37-6950 T Manual

PC SETUP
Auto Adjust
Horizontal Position GGGGGGGG
Vertical Position GGGGGGGG
Size GGGGGGGGGG
Phase GGGGGGGGG
Z
Select
42

PC MONITOR MODE

Connecting a PC

1 Connect the socket
sponding socket on the PC using a VGA cable.
2 Connect the socket
corresponding socket on the PC using a cinch cable (audio
signal).
Note:
Adjust your PC to the monitor (for example, picture resolution
1280 x 768, picture frequency 60 Hz).

Selecting the channel position for the PC

1
Press »AV«, select the »PC« channel with »
»G« to confirm.

Settings for the PC

1 Open the menu with »i«.
– The »PICTURE« menu is displayed.
2 Select the »PC SETUP« menu with »
»G«.
3 Select the function or setting you want with »
–
» « or »
– Options:
45
45
»Auto Adjust«
0
»Horizontal Position«
50
»Vertical Position«
»Size«
Back
»Phase«
Exit
4 Press »
»PC-IN VGA« on the television to the corre-
»PC AUDIO
+
« to execute it.
For automatic PC configuration;
Adjust the picture position horizon-
tally;
Adjust the picture position vertically;
Set the cycle frequency;
Remove horizontal flicker, blurring
and horizontal lines.
i
« to finish the settings.
----------------------------------------------------------
IN« on the television to the
« or » « and press
V Λ
– +
« or » « and confirm with
« or » « and press
V Λ