Picture Settings; Audio Settings - Grundig VISION 7 Manual

PICTURE
Brightness
Contrast
Colour
Sharpness
Noise Reduction Low
Colour Temp. Normal
Artefact Reduct. Mid
Active Contrast On
Backlight Off
Back
SOUND
Volume
Balance
Sound type Stereo
Sound Mode Normal
AVL Off
Equalizer
Headphones
TruSurround XT Off
Back
16
SETTINGS

Picture settings

1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2
Select »PICTURE« with »
– The »PICTURE« menu appears.
3
Select the line »Brightness«, »Contrast«, »Colour«, »Sharpness«,
»Noise Reduction«, »Colour Temp.«, »Active Contrast« (back-
lighting adjusts according to the picture content to ensure opti-
mum contrast) or »Backlight« (backlighting for the LCD screen)
with »
Exit
Notes:
You can only select the »Artefact Reduct.« function on digital TV
stations and AV presets. »Artefact Reduct.« reduces any interfer-
ence from artefacts (pixel blocks) from digital stations with MPEG
compression (such as from DVB-T receivers or DVD players).
You can only change the backlighting if the »Active Contrast«
function is switched off.
4
Press »
5
Press »i« to finish the settings.

Audio settings

1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2
Select »SOUND« with »
– The »SOUND« menu appears.
Volume
1
Select »Volume« with »
–
» « or »
Balance
1
Select »Balance« with »
Exit
–
» « or »
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »Dual II«) and the
dubbed version on sound channel A (display: »Dual I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception
quality is poor.
1
Select »Sound type« with »
–
» « or »
----------------------------------------------------------------------------------------------------
Λ « or »
Λ « or » V «.
–
+
« or » « to select the level.
Λ « or »
Λ « or »
+
«.
Λ
« or »
+
«.
Λ
+
«.
V « and confirm with »G«.
V « and confirm with »G«.
V « and adjust the setting with
V
« and adjust the setting with
« or » V « and adjust the setting with