PC SETUP
Auto Adjust
Horizontal Position
GGGGGGGG
Vertical Position
GGGGGGGG
Size
GGGGGGGGGG
Phase
GGGGGGGGG
Z
Select
36
PC MONITOR MODE
Connecting a PC
1
Connect the socket
sponding socket on the PC using a VGA cable.
2
Connect the socket
corresponding socket on the PC using a cinch cable (audio
signal).
Note:
Adjust your PC to the monitor (for example, picture resolution
1280 x 768, picture frequency 60 Hz).
Selecting the channel position for the PC
1
Press »AV«, select the »PC« channel with »
»G« to confirm.
Settings for the PC
1
Open the menu with »i«.
– The »PICTURE« menu is displayed.
2
Select the »PC SETUP« menu with »
»G«.
3
Select the function or setting you want with »
–
»
« or »
– Options:
45
45
»Auto Adjust«
0
»Horizontal Position«
50
»Vertical Position«
»Size«
Back
»Phase«
Exit
4
Press »
»PC-IN
VGA« on the television to the corre-
»PC AUDIO
+
« to execute it.
For automatic PC configuration;
Adjust the picture position horizon-
tally;
Adjust the picture position vertically;
Set the cycle frequency;
Remove horizontal flicker, blurring
and horizontal lines.
i
« to finish the settings.
----------------------------------------------------------
IN« on the television to the
« or »
« and press
V
Λ
–
+
« or »
« and confirm with
« or »
« and press
V
Λ