Changing Stored Channels For Analogue Stations - Grundig VISION 7 Manual

CHANNEL SETUP
System BG
Channel C 03
Fine tuning 0
a s
Search
Program no P01
Store
Autoprogram
Select
Exit
Back
PROGRAM TABLE
01 ARD 06 PRO 7 11 ----
02 ZDF 07 BR 12 ----
03 BR 08 13 ----
04 RTL 09 ---- 14 ----
05 SAT 1 10 ---- 15 ----
Skip Name
Move Delete
OK Select Exit
SPECIAL SETTINGS
Re-tuning all analogue television channels
These settings are only necessary if you can not receive any digital
stations or if you want to re-tune all analogue channels (e.g. if you
have moved).
1
Press »i« to open the »MAIN MENU«.
2
Select »Channel setup« with »
– The »CHANNEL SETUP« menu appears.
3
Select »Autoprogram« with »
– The »COUNTRY« menu appears.
4
Press » Λ «, »
5
Press »G« to start the search.
– The search begins. It may last a few minutes, depending on the
number of television stations found.
– The automatic search may last a few minutes, depending on
the number of television channels received.
Note:
You can interrupt the search by pressing »i«.

Changing stored channels for analogue stations

If channels were stored with the automatic channel search during
the tuning of the television channels, you can delete them. You can
also store stations in a different preset, change or enter the name of
a stations as well as skip channels.
Select channel lists
1
Open the »SOURCE TABLE« menu by pressing »AV«.
2
Select the »ANALOG TV« signal source with »
press »G« to confirm.
3
Open the »MAIN MENU« menu with »i«.
4
Select »Program Table« with »
confirm.
Note:
Additional operations are explained in the following sections.
Deleting channels
1
In the »PROGRAM TABLE« menu, select the station to be deleted
Λ V
with » «, »
2
Highlight the channel with »
3
F
Press » « (blue) to delete the channel.
Note:
To delete other stations, repeat steps
------------------------------------------------------------------
Λ « or »
Λ « or »
– +
V «, » « or » « to select the country.
Λ
« or »
– +
«, » « or » «.
F
« (blue).
V « and confirm with »G«.
V « and confirm with »G«.
Λ « or » V « and
V
« and press »G« to
1 and 3.
41