Settings For Digital Channels - Grundig VISION 7 Manual

FEATURES
Menu language English
Timer
Reset
Active antenna Off
IDTV Settings
Select
Back Exit
FEATURES
Menu language English
Timer
Reset
Active antenna Off
IDTV Settings
Back Exit
FEATURES
Menu language English
Timer
Reset
Active antenna Off
IDTV Settings
Select
Back Exit
IDTV SETTINGS
Language Settings
Time Settings
Parental Control
No CA-Module
CA - Module
Signal Information
Software Update
1.1.4
Version
Back
Select and Open
Exit
CONVENIENCE FUNCTIONS
Resetting the television to its original state
This function enables you to delete the station lists and all custom
settings.
1
Select »Reset« with »
2
Press »G« to confirm the reset.
– The »Menu language« menu is displayed.
3
Continue the settings as described in the chapter on searching
for digital channels on page 13.
Switching the antenna voltage on and off
The antenna power supply may only be switched on if the antenna
is actually an active indoor antenna with a signal amplifier and it is
not already supplied with a voltage via a mains plug (or similar
supply). Otherwise you may cause a short circuit and irreparably
damage your antenna.
1
Select »Active antenna« with »
firm.
–
2
Press » « or »
3
Press »i« to end the setting.

Settings for digital channels

1
Open the »MAIN MENU« menu with »i«.
– The »MAIN MENU« menu is displayed.
2
Select »Features« with »
3
Select »IDTV Settings« with »
confirm.
Note:
Additional operations are explained in the following sections.
Language settings
You can alter the appearance of subtitles or disable them, select the
subtitle language, select a second subtitle language, and select the
audio language and a second audio language.
1
Select »Language Settings« with »
confirm.
2
Select the menu item (»Subtitle Mode«, »Subtitle and Teletext«,
»Subtitle, alternative«, »Audio«, »Audio, alternative«) with »
or » V «.
–
3
Press » « or »
4
Press »i« to end the setting.
Λ « or » V « and press »G« to confirm.
Λ « or »
+
« to switch the antenna voltage on or off.
Λ « or » V « and press »G« to confirm.
Λ « or »
Λ
« or »
+
« to make the setting.
------------------------------
V « and press »G« to con-
V « and press »G« to
V
« and press »G« to
Λ
«
27