Pc Monitor Mode; Connecting A Pc - Grundig VISION 6 Manual

Hide thumbs Also See for VISION 6:
Table of Contents

Advertisement

SETUP
Auto position
H Position
V Position
Clock
Fase
Select
Exit
Back

PC MONITOR MODE

Connecting a PC

1
Connect the socket
sponding socket on the PC using a VGA cable.
2
Connect the socket
corresponding socket on the PC using a cinch cable (audio
signal).
Note:
Adjust your PC to the monitor (for example, picture resolution
1280 x 768, picture frequency 60 Hz).
Selecting the channel position for the PC
1
Press »AV«, select the »PC« channel with »P+« or »P-« and press
»OK« to confirm.
Settings for the PC
1
Press »i« to open the »INFO« menu.
– The »INFO« menu appears.
2
Select »SETUP« with »P+« or »P-« and press »OK« to confirm.
3
Select the function or setting you want with
4
press »
« or »
– Options:
»Auto position« For automatic PC configuration;
»H. Position«
»V. Position«
»Clock«
»Phase«
4
Press »i« to exit the »SETUP« menu.
»PC-IN
VGA« on the television to the corre-
»PC
AUDIO-IN« on the television to the
3
« to execute it.
Adjust the picture position horizontally;
Adjust the picture position vertically;
Set the cycle frequency;
Remove horizontal flicker, blurring and hori-
zontal lines.
----------------------------------------------------------
»P
+« or
»P-
« and
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

37-6820

Table of Contents