Printer Messages - DataCard SP25 Plus Printer Manual

Printer messages

The SP Series Card Printer with the Built-in Ethernet feature displays messages on the LCD panel.
If the Data Format is set to SmartDriver, messages (that match up with printer messages) also appear on the PC
in message boxes. You might see messages on the LCD panel that do not appear on the PC, because the LCD
displays all printer messages while the SmartDriver shows the most important message if a group of messages
occurs at the same time. In addition, the SmartDriver can display messages that begin in the driver (not the
printer) and those messages do not appear on the LCD panel.
When a message appears on the LCD panel, do the following:
1 Find the message number in this section. Messages are
listed in numerical order.
2 Use the cause and solution information to fix the problem.
3 Make sure cards are loaded and the ribbon is in the
printer. Close the printer cover (if it was opened).
4 Press the Ready key to clear the message.
5 If another message is displayed, repeat steps 1 through 4.
If not, the printer returns to the ready or busy state.
Page 65