DataCard SP25 Plus Printer Manual page 39

Set the Data Format
Before you send any data to the printer, set the data format so the printer can receive the data you send.
1 Press the Enter key to enter the menu system.
2 Press the Up or Down Arrow key to scroll to "Configuration" and
press the Enter key.
3 Press the Up or Down Arrow key to scroll to "Data Format" and
press the Enter key.
4 Press the Up or Down Arrow key to display the data format you
want on the second line of the display and press the Enter key.
5 The "Apply/Restart" prompt appears on the second line of the
display. Press the Enter key to confirm the data format choice
and restart the printer.
6 You can choose Exit to leave without changing the data format.
Press the Enter key repeatedly to leave the menu system.
Page 34