Memory module
Description
8-MB (2400, 1.2-V, DDR4)
4-MB (2400, 1.2-V, DDR4)
Update BIOS before adding memory modules
Before adding new memory, make sure you update the computer to the latest BIOS.
CAUTION:
various system problems.
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
Remove the memory module:
1.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The edge of the module opposite the slot rises away from the computer.).
30
Chapter 5 Removal and replacement procedures
Failure to update the computer to the latest BIOS prior to installing new memory may result in
Bottom cover on page
Battery on page
24).
26).
Spare part number
862398-855
862397-855