Speakers - HP ENVY 17 Maintenance And Service Manual

Speakers

Description
Speakers (include left and right speakers, cables, and four rubber isolators)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
a. Battery (see
b. Optical drive (see
c. Fan (see
d. System board (see
Remove the speakers:
1. Release the speaker cable (1) from the retention clips built into the keyboard/top cover.
2. Remove the speakers (2).
NOTE:
isolators (3). These isolators are critical to the performance of the speakers. The absence of these isolators
or damage to them can degrade the speaker performance.
Reverse this procedure to install the speakers.
Bottom cover on page
Battery on page
Optical drive on page
Fan on page 44)
System board on page
When removing the speakers, make note of the location and condition of the four rubber
24), and then remove the following components:
26)
41)
46)
Spare part number
L20705-001
Component replacement procedures 51