1. Manuals
  2. Brands
  3. HP Manuals
  4. Laptop
  5. ENVY 17
  6. Maintenance and service manual

HP Envy Notebook 17 Maintenance And Service Manual

Models 17-s000 – 17-s099
Hide thumbs Also See for Envy Notebook 17:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Maintenance and Service Manual, Reference Manual
HP Envy Notebook 17
Models 17-s000 – 17-s099
Intel Models
Maintenance and Service Guide

Advertisement

Table of Contents
loading

Related Manuals for HP Envy Notebook 17

Summary of Contents for HP Envy Notebook 17

  • Page 1 HP Envy Notebook 17 Models 17-s000 – 17-s099 Intel Models Maintenance and Service Guide...
  • Page 2 The information contained herein is subject to http://www.microsoft.com for details. change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
  • Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 4 Safety warning notice...

  • Page 5: Table Of Contents

    Table of contents 1 Product description ............................1 2 External component identification ........................5 Right side ................................5 Display ..................................6 Top ..................................7 TouchPad ............................. 7 Lights ..............................8 Buttons and speakers .......................... 9 Keys ..............................10 Bottom ................................. 11 Labels ...................................
  • Page 6 Determining the BIOS version ......................57 Downloading a BIOS update ......................58 8 Using HP PC Hardware Diagnostics (UEFI) ....................... 59 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ..............59 9 Specifications .............................. 61 Computer specifications ............................61 43.9-cm (17.3-in) display specifications ......................
  • Page 7 What you need to know before you get started ............. 67 Using the HP Recovery partition (select products only) ..........68 Using HP Recovery media to recover ................68 Changing the computer boot order ................68 Removing the HP Recovery partition (select products only) ......... 70 11 Power cord set requirements ........................
  • Page 8 viii...

  • Page 9: Product Description

    Category Description Product name HP Envy Notebook 17 Processors 6th generation Intel® Core™ i7 Processor (SKL-H, 2-chip BGA) Intel Core i7-6700U (2.6 GHz, turbo up to 3.5 GHz), 1600 MHz/6 MB L3, quad core 45 W (cTDP to 35 W) 6th generation Intel Core i7 Processor Intel Core i7-6500U (2.5 GHz, SC turbo up to 3.1 GHz), 1600 MHz/4 MB L3, dual core 15 W...
  • Page 10 External USB SATA, ODD (aluminum material) Audio/video HP TrueVision HD: HD camera (fixed, no tilt with activity LED, 1280×720 by 30 frames per second) Dual array digital microphone with appropriate software - beam forming, echo cancellation, noise suppression Dual speakers...
  • Page 11 Category Description Headphone jack Microphone jack USB 2.0/3.0 Allocation: ● 3 for unit (2*3.0, 1*2.0) ● 1 for camera (2.0) ● 1 for WLAN (BT) (2.0) ● 1 for touch screen (2.0) ● RJ-45/Ethernet AC Smart Pin adapter plug ● Keyboard/ Full size standard three coat paint island-style backlit keyboard with numeric keypad pointing...
  • Page 12 Chapter 1 Product description...

  • Page 13: External Component Identification

    External component identification Right side Component Description Power light ● On: The computer is on. ● Blinking: The computer is in the Sleep state, a power- saving state. The computer shuts off power to the display and other unneeded components. ●...

  • Page 14: Display

    NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Display Component Description Internal display switch Turns off the display and initiates Sleep if the display is closed while the power is on.

  • Page 15: Top

    TouchPad Component Description TouchPad zone Reads your finger gestures to move the pointer or activate items on the screen. Left TouchPad button Functions like the left button on an external mouse. Right TouchPad button Functions like the right button on an external mouse.

  • Page 16: Lights

    Lights Component Description Power light ● On: The computer is on. ● Blinking: The computer is in the Sleep state, a power- saving state. The computer shuts off power to the display and other unneeded components. ● Off: The computer is off or in Hibernation. Hibernation is a power-saving state that uses the least amount of power.

  • Page 17: Buttons And Speakers

    Buttons and speakers Component Description Power button ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, press the button briefly to exit Sleep.

  • Page 18: Keys

    Keys Component Description Displays system information when pressed in combination with key. Executes frequently used system functions when pressed in combination with the key, action keys, or the spacebar. Windows key Opens the Start menu. NOTE: Pressing the Windows key again will close the Start menu.

  • Page 19: Bottom

    Bottom Component Description Vents (4) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Battery lock Locks the battery in the battery bay.
  • Page 20 Component Serial number Product number Warranty period Model number (select products only) Component Model name (select products only) Product number Serial Number Warranty period ● Regulatory label(s)—Provide(s) regulatory information about the computer. ● Wireless certification label(s)—Provide(s) information about optional wireless devices and the approval markings for the countries or regions in which the devices have been approved for use.

  • Page 21: Illustrated Parts Catalog

    Illustrated parts catalog Computer major components NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Computer major components...
  • Page 22 Item Component Spare part number Display assembly [43.9-cm 17.3-in] HD/FHD, touch screen NOTE: Touch displays are spared both as entire hinge-ups and at the subcomponent level. NOTE: For display assembly spare part information, see Display assembly subcomponents on page Antiglare FHD+ touch screen 835868-001 Antiglare FHD+ non-touch screen 846890-001...
  • Page 23 Item Component Spare part number (11) USB board for use with 6th generation processors (includes cable) 844489–001 USB/Audio Cable 844490–001 (12) Power button board (includes cable) 809310-001 (13) Memory module (PC3L, 12800, 1600-MHz): 8 GB 693374-005 4 GB 691740-005 (14) Power connector cable 809295-001 (15)

  • Page 24: Display Assembly Subcomponents

    Display assembly subcomponents Item Component Spare part number LCD panel assembly 17.3 AG FHD non-touch screen 846890-001 17.3 AG FHD touch screen 835868-001 Webcam/microphone module non-touch screen and touch screen 810961-001 Panel Bracket (included with the Display Panel touch screen) Display cable FHD touch screen 809294–001...

  • Page 25: Miscellaneous Parts

    HP Smart AC adapter: AC adapter, 65-W, non-PFC, 4.5 mm 710412-001 45-W non-PFC, non-slim HP Smart AC adapter (for use in all countries and regions except for the 741727-001 People’s Republic of China and India) Power cord (3-pin, black, 1.0-m):...

  • Page 26: Mass Storage Devices

    Mass storage devices Item Component Spare part number DVD+/-RW Double-Layer SuperMulti Drive For use in natural silver models 809304-001 Battery/Optical drive cable kit (not illustrated) 810928-001 Hard drive (does not include bracket): 2 TB, 5400-rpm, 2.5-inch 801808-005 1 TB, 5400-rpm, 2.5-inch, hybrid 8 GB SSD 731999-005 1 TB, 5400-rpm, 2.5-in 778192-005...

  • Page 27: Removal And Replacement Procedures Preliminary Requirements

    Removal and replacement procedures preliminary requirements Tools required You will need the following tools to complete the removal and replacement procedures: Flat-bladed screwdriver ● ● Magnetic screwdriver Phillips P0 and P1 screwdrivers ● Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures.

  • Page 28: Drive Handling

    Drive handling CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 29: Packaging And Transporting Guidelines

    Typical electrostatic voltage levels Relative humidity Event Walking across carpet 35,000 V 15,000 V 7,500 V Walking across vinyl floor 12,000 V 5,000 V 3,000 V Motions of bench worker 6,000 V 800 V 400 V Removing DIPS from plastic tube 2,000 V 700 V 400 V...
  • Page 30 Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times.

  • Page 31: Removal And Replacement Procedures For Customer Self-Repair Parts

    Self-Repair is supported in your location. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures...

  • Page 32: Optical Drive

    Rotate the battery upward (3), and then remove the battery from the computer (4). Optical drive Description Spare part number Optical drive (DVD+/-RW Double-Layer SuperMulti) for use in natural silver models 809304-001 Before removing the optical drive, follow these steps: Shut down the computer.
  • Page 33 Remove the optical drive (2) by sliding it out of the optical drive bay. Reverse this procedure to reassemble and install the optical drive. Component replacement procedures...
  • Page 34 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts...

  • Page 35: Removal And Replacement Procedures For Authorized Service Provider Parts

    Accessing these parts can damage the computer or void the warranty. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures...

  • Page 36: Bottom Cover

    Bottom cover Description Spare part number Bottom cover hinge caps 809312-001 Rubber screw covers 809314-001 Bottom cover (for use in natural silver models) 835865-001 Top cover/keyboard/TouchPad ash silver (includes TouchPad brackets) for use in the United States 835866-001 Top cover/keyboard black (for use in the United States 835867-001 Before removing the bottom cover, follow these steps: Shut down the computer.
  • Page 37 Remove the two screw covers (1) from near the battery bay. Remove the two Phillips PM2.5×6.5 screws from near the battery bay (2). Remove the two Phillips PM2.0×2.0 flat screws from the optical drive bay (3). Remove the seventeen Phillips PM screws that secure the top cover to the computer. Component replacement procedures...

  • Page 38: Remove Display

    Use a non-marking tool to disengage the bottom cover from the computer. Work around the seams on all sides of the computer. CAUTION: To avoid damaging the cover, do not pry the cover near the optical drive bay. Reverse this procedure to install the bottom cover. Remove Display NOTE: The display panel can be removed once the bottom cover is removed.

  • Page 39: Hard Drive

    Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket. Description Spare part number 2 TB, 5400-rpm, 2.5-inch 801808-005 1 TB, 5400-rpm, 2.5-in 778192-005 1 TB, 5400-rpm, HDD 2.5-in 731999–005 Before removing the hard drive, follow these steps: Shut down the computer.
  • Page 40 Disconnect the hard drive connector and cable (1) from the hard drive. To disassemble the hard drive, pull the brackets away from each side of the hard drive (2). Reverse this procedure to reassemble and install the hard drive. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 41: Wlan Module

    WLAN module Description Spare part number Intel Dual Band Wireless-AC 3165 802.11 ac 1x1 WiFi + Bluetooth 4.0 Combo Adapter for Windows 10 806723-005 CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region.
  • Page 42 Remove the WLAN module by pulling the module away from the slot at an angle (3). NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WLAN module.

  • Page 43: Rtc Battery

    RTC battery Description Spare part number RTC battery 811080-001 Before removing the RTC battery, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 44: Memory Module

    Memory module Description Spare part number 8-GB (PC3L, 12800, 1600-MHz) 693374-005 4-GB (PC3L, 12800, 1600-MHz) 691740-005 Before removing a memory module, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 45: Fan

    NOTE: The fan spare part kit includes replacement thermal materials. Description Spare part number 806747-001 NOTE: To properly ventilate the computer, allow at least 7.6 cm (3.0 in) of clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist.

  • Page 46: Heat Sink Assembly

    Remove the fan from the computer (3). Reverse this procedure to install the fan. Heat sink assembly NOTE: The heat sink assembly spare part kit includes replacement thermal materials. Description Spare part number Heat sink for use in models with discrete graphics 806827-001 Heat sink for use in models with UMA graphics 15 W 806826-001...
  • Page 47 Remove the optical drive (see Optical drive on page 24). Remove the bottom cover (see Bottom cover on page 28). Remove the fan (see Fan on page 37). To remove the heat sink assembly: Position the computer upright and open it. If you have a model with discrete graphics, in the order indicated, remove the six Phillips PM2.0×3.0 screws (1) that secure the heat sink to the system board.
  • Page 48 Remove the heat sink (2) from the system board. ● Discrete graphics: Thermal paste is used on the processor and associated heat sink area (1), (2), as well as the graphics chip and associated heat sink area (3), (4). ● UMA graphics: Thermal paste is used on the heat sink (1) and the processor (2).
  • Page 49 Reverse this procedure to reassemble and install the heat sink assembly. Component replacement procedures...

  • Page 50: Optical Drive Connector

    Optical drive connector Description Spare part number Optical drive connector 810928-001 Before removing the optical drive connector, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 51: System Board

    System board NOTE: The system board spare part kit includes replacement thermal materials. Description Spare part number System board (includes replacement thermal materials): All system boards use the following part numbers: xxxxxx-001: Without the Windows operating system xxxxxx-601: Windows 10 For use in models with discrete graphics (NVIDIA N16S-GT (GeForce 940M)): ●...
  • Page 52 To remove the system board: Position the computer upright, and then disconnect the following cables from the system board: (1): ClickPad cable (2): TouchPad cable (3): Hard drive cable (4): Optical drive cable (5): Keyboard cable (6): Power connector cable (7): Display cable (8): Speaker cable (9): Power button board...
  • Page 53 Lift the right side of the system board, and then lift the right side of the system board up to gain access to the USB board cable and connector underneath (2). Disconnect the USB board cable from the connector under the system board. See USB board on page 46 for cable removal instructions.

  • Page 54: Usb Board

    USB board Description Spare part number USB board for use with 6th generation processors (includes cable) 844489–001 Before removing the USB board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 55: Speakers

    Speakers Description Spare part number Speakers (includes left and right speakers and cable) 809316-001 Before removing the speakers, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 56: Power Button Board

    Power button board Description Spare part number Power button board (includes cable) 809310-001 Before removing the power button board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 57: Power Connector

    Power connector Description Spare part number Power connector cable 809295-001 Before removing the power connector cable, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 58: Touchpad

    TouchPad Description Spare part number TouchPad board with cable 811552–001 Before removing the TouchPad, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 59: Display Assembly, Touch

    Lift the bottom of TouchPad and rear bracket up, and then pull it away from computer (3). NOTE: When installing the TouchPad, note that the metal protrusion that extents from the TouchPad is installed UNDER the keyboard shield (4). Reverse this procedure to install the TouchPad. Display assembly, touch Description Spare part number...
  • Page 60 Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 23). Remove the optical drive (see Optical drive on page 24).
  • Page 61 Turn the display with the bezel down and the back of the panel up. Disconnect the display cables from the panel and bezel (1), (2). Release the connections (3), (4) and lift the panel (5). To remove the webcam/microphone module, position the display assembly with the top edge toward you.
  • Page 62 Remove the webcam/microphone module from the display (2). To remove the display panel: Position the display assembly with the top edge toward you. Remove the six Phillips PM2.0×1.5 screws (1) that secure the display panel to the bezel. Lift the top of the panel (2). To remove the display hinges: Remove the six Phillips PM2.5×2.0 screws (1) from the bottom of the hinges, and the two Phillips PM2.0×2.5 screws from the top of the hinges that secure the display hinges to the display.
  • Page 63 Remove the display hinges (2). To remove the wireless antenna cables and transceivers, release the wireless antenna cables from the clips (1) built into the display enclosure, peel the transceivers from the enclosure (2), and then remove the antenna cables and transceivers. NOTE: Number of antennas and transceivers may vary.
  • Page 64 Remove the cable from the clips built into the display panel (2), and then remove the cable from the display (3). If replacing the display enclosure, be sure that the subcomponents (including the webcam/microphone module, the antenna receivers, and all associated cables and hardware) are transferred to the new enclosure.

  • Page 65: Using Setup Utility (Bios)

    To reveal the BIOS version information (also known as ROM date and System BIOS), use one of these options. ● HP Support Assistant Type support in the taskbar search box, and then select the HP Support Assistant app. – or – Click the question mark icon in the taskbar.

  • Page 66: Downloading A Bios Update

    If your computer is connected to a network, consult the network administrator before installing any software updates, especially system BIOS updates. Type support in the taskbar search box, and then select the HP Support Assistant app. – or – Click the question mark icon in the taskbar.

  • Page 67: Using Hp Pc Hardware Diagnostics (Uefi)

    Using HP PC Hardware Diagnostics (UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components.
  • Page 68 Use the categories listed to find your product. – or – Click Find Now to let HP automatically detect your product. Select your computer, and then select your operating system. In the Diagnostic section, follow the on-screen instructions to select and download the UEFI version you want.

  • Page 69: Specifications

    Specifications Computer specifications Metric U.S. Dimensions Depth 275 mm 10.89 in Width 418.8 mm 16.48 in Height (rear) 28.5 mm 1.15 in Weight 2.9 – 3.2 kg 6.40 – 7.06 lb Input power Operating voltage and current 19.5 V dc @ 2.31 A – 45 W 18.5 V dc @ 3.5 A or 19.5 V dc @ 3.33 A –...

  • Page 70: 43.9-Cm (17.3-In) Display Specifications

    43.9-cm (17.3-in) display specifications Metric U.S. Active diagonal size 43.9-cm 17.3-in Thickness 6.0 mm or 4.0 mm 0.157 inch or 0.236 inch Resolution 1920x1080 (FHD) Surface treatment Antiglare Contrast ratio 300:1 (typical) Brightness 220 nits (typical) Viewing angle Backlight WLED Companion standard Chapter 9 Specifications...

  • Page 71: Hard Drive Specifications

    Hard drive specifications 2 TB* 1 TB* 1 TB* Dimensions Height 9.5 mm 9.5 mm 9.5 mm Length 100.4 mm 100.4 mm 100.4 mm Width 69.9 mm 69.9 mm 69.9 mm Weight 115.0 g 115.0 g 115.0 g Interface type SATA SATA SATA...

  • Page 72: Dvd±Rw Supermulti Dl Drive Specifications

    DVD±RW SuperMulti DL Drive specifications Applicable disc Read: Write: CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD- CD-R and CD-RW ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo- DVD+R, DVD+RW, DVD-R, DVD-RW, CD, Video CD), Multisession CD (Photo-CD, CD- DVD-RAM EXTRA, Portfolio, CD-R, CD-RW), CD-R, CD-RW, DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD- R, DVD-RW, DVD+R, DVD+RW, DVD-RAM Center hole diameter...

  • Page 73: 10 Backing Up, Restoring, And Recovering

    Use HP Recovery Manager to create HP Recovery media after you successfully set up the computer. This step creates a backup of the HP Recovery partition on the computer. The backup can be used to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced.

  • Page 74: Using Windows Tools

    DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs. Do not use rewritable discs such as CD±RW, DVD±RW, double-layer DVD±RW, or BD-RE (rewritable Blu-ray) discs; they are not compatible with HP Recovery Manager software. Or, instead, you can use a high- quality blank USB flash drive.

  • Page 75: Recovering Using Hp Recovery Manager

    ● ● If your computer does not allow the creation of HP Recovery media or if the HP Recovery media does not work, you can obtain recovery media for your system from support. See the Worldwide Telephone Numbers booklet included with the computer. You can also find contact information from the HP website.

  • Page 76: Using The Hp Recovery Partition (Select Products Only)

    Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly.
  • Page 77 ▲ Turn on or restart the tablet, and then quickly hold down the volume down button; then select f9. - or - Turn on or restart the tablet, and then quickly hold down the Windows button; then select f9. Select the optical drive or USB flash drive from which you want to boot. Follow the on-screen instructions.

  • Page 78: Removing The Hp Recovery Partition (Select Products Only)

    Removing the HP Recovery partition (select products only) HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space. IMPORTANT: After you remove the HP Recovery partition, you will not be able to perform System Recovery or create HP recovery media from the HP Recovery partition.

  • Page 79: 11 Power Cord Set Requirements

    11 Power cord set requirements The wide-range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts ac, or from 220 to 240 volts ac. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased.

  • Page 80: Requirements For Specific Countries And Regions

    Requirements for specific countries and regions Country/region Accredited agency Applicable note number Argentina IRAM Australia Austria Belgium CEBEC Brazil ABNT Canada Chile Denmark DEMKO Finland FIMKO France Germany India Israel Italy Japan The Netherlands KEMA New Zealand SANZ Norway NEMKO The People's Republic of China Saudi Arabia SASO...
  • Page 81 Country/region Accredited agency Applicable note number The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the Japanese Dentori Law. The flexible cord must be Type VCTF, 3-conductor, 0.75mm or 1.25mm conductor size.
  • Page 82 Chapter 11 Power cord set requirements...

  • Page 83: 12 Recycling

    Follow the local laws and regulations in your area for battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle.
  • Page 84 Chapter 12 Recycling...

  • Page 85: Index

    DVD±RW SuperMulti DL Drive hinges bottom 12 specifications 64 illustrated 16, 51 bottom cover removing 54 illustrated 15 HP PC Hardware Diagnostics (UEFI) electrostatic discharge 20 removing 28 using 59 equipment guidelines 22 buttons HP Recovery Manager esc key, identifying 10...
  • Page 86 Bluetooth 12 product description 2 recovery regulatory 12 USB 3.0 5 discs 66, 68 serial number 11 power button board HP Recovery Manager 67 service 11 illustrated 15 media 68 wireless certification 12 removing 48 starting 68 WLAN 12 power button, identifying 9...
  • Page 87 security cable slot, identifying 5 USB 3.0 port, identifying 5 security, product description 3 USB board sensors, product description 2 removing 46 serial number 11 spare part number 15, 46 serial number, computer 11 service considerations vents, identifying 5, 11 cables 19 video, product description 2 connectors 19...
  • Page 88 Index...

Table of Contents