Dot1X Re-Authentication - D-Link xStack DXS-3250 Cli Manual

dot1x re-authentication

The dot1x re-authentication Interface Configuration mode command enables periodic re-authentication of the
client. To return to the default configuration, use the no form of this command.
Syntax
dot1x re-authentication
no dot1x re-authentication
Default Configuration
Periodic re-authentication is disabled.
Command Mode
Interface Configuration (Ethernet)
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables periodic re-authentication of the client.
Console(config)# interface ethernet 1/16
Console(config-if)# dot1x re-authentication
Page 443
802.1x Commands