Set System Mode - D-Link xStack DXS-3250 Cli Manual

D-Link CLI Reference Guide

set system mode

The set system mode is a Priviledged EXEC command to activate/deactivate features
product specific.
set system mode features control routing {router | switch} qos {active | inactive} policy-based-vlans
{active | inactive}
no system mode features control
Parameters
•
features control routing — Configures the device to function as a switch or a router.
•
qos — Configures the QoS activity status in the device.
•
policy-based-vlans — Configures the policy based VLAN activity status in the device.
•
active — Activates the feature.
•
inactive — Deactivates the feature.
Defaults
The default is product specific
Command Mode
Priviledged EXEC
Usage Guidelines
It is required that the running-config file would be empty (default configuration) before executing the command.
After executing the command, a reset is required since the settings would be effective only after reboot.
Examples
The following example deactivates QoS on the system.
Console# configure
Console (config)# system features control qos non-active
Page 378
.
The exact syntax is