Section 6.Configuration And Image File Commands; Copy - D-Link xStack DXS-3250 Cli Manual

D-Link CLI Reference Guide
Section 6. Configuration and Image File Commands

copy

The copy Privileged EXEC mode command copies files from a source to a destination.
Syntax
copy source-url destination-url
Parameters
•
source-url — The source file location URL or reserved keyword of the source file to be copied.
(Range: 1-160 characters)
•
destination-url — The destination file URL or reserved keyword of the destination file.
(Range: 1-160 characters)
The following table displays keywords and URL prefixes:
Key wo rd Sou rce o r Dest i na t io n
flash: Source or destination URL for flash memory. It's the default in case a URL is specified
without a prefix.
running-config Represents the current running configuration file.
startup-config Represents the startup configuration file.
image If the source file, represents the active image file. If the destination file, represents the
non-active image file.
boot Boot file.
tftp:// Source or destination URL for a TFTP network server. The syntax for this alias is tftp://
host/[directory]/filename. The host can be represented by its IP address or hostname.
xmodem: Source for the file from a serial connection that uses the Xmodem protocol.
unit://member/ Image file on one of the units. To copy from the master to all units, specify * in the member
image field.
unit://member/ Boot file on one of the units. To copy from the master to all units, specify * in the member
boot field.
null: Null destination for copies or files. A remote file can be copied to null to determine its size.
backup-config Represents the backup configuration file.This is a user-defined name for up to four backup
configuration files.
unit://member/ Backup configuration on one of the units.
backup-config
Default Configuration
This command has no default configuration.
Page 86