Table of Contents
Advertisement
Super X13SCW-F User's Manual
Motherboard Features
CPU
•
Supports an Intel Xeon E-2400 or 12th Generation Pentium (V0 - LGA1700) processor with up to eight cores
Memory
•
Up to 128 GB of ECC UDIMM DDR5 memory with speeds of up to 4400 MT/s in four memory slots
Note: This motherboard supports 4400 MT/s with the one or two DIMM(s) per channel population configuration.
DIMM Size
•
8 GB, 16 GB, 32 GB at 1.1 V
Note: For the latest CPU/memory updates, refer to our website at http://www.supermicro.com/products/motherboard.
Chipset
•
Intel C266
Expansion Slots
•
One Supermicro-Proprietary WIO-L Slot PCIe 5.0 x16 (JSXB1A, JSXB1B, JSXB1C)
•
One Supermicro-Proprietary WIO-R Slot PCIe 4.0 x4 (JSXB2)
•
One M.2 slot for CPU PCIe 4.0 x4 (Supports M-Key 2280/22110 FF)
•
One M.2 slot for PCH PCIe 4.0 x4 (Supports M-Key 2280/22110 FF)
Network Controllers
•
Intel I210 for Dual 1 GbE BASE-T Ports
•
One Dedicated IPMI LAN port located on the back I/O panel
Baseboard Management Controller (BMC)
•
ASpeed AST2600 BMC
Graphics
•
Graphics controller via ASpeed AST2600 BMC
I/O Devices
•
Serial (COM) Port
•
SlimSAS x8 Connector
•
Video (VGA) Port
Notes: The table above is continued on the next page.
Motherboard Features
•
One serial port on the back I/O panel (COM1)
•
One front accessible serial port header (COM2)
•
Eight SATA 3.0 ports at 6 Gb/s (I-SATA 0–I-SATA7 with RAID 0, 1, 5, 10)
•
One VGA connection on the back I/O panel
14
Advertisement
Table of Contents
