Avaya S8500 Quick Start Manual page 6

For G350 and G700 Media Gateways:
Manufacturer's Port
Identifier
Ground Start CO trunk
DID trunk
Loop Start CO trunk
1.544 digital interface
Basic Rate Interface
For all media gateways:
If the terminal equipment (for example, the media server or media gateway) causes harm to the telephone
network, the telephone company will notify you in advance that temporary discontinuance of service may
be required. But if advance notice is not practical, the telephone company will notify the customer as soon
as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is
necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this happens, the telephone company will provide advance
notice in order for you to make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, for repair or warranty information, please contact the
Technical Service Center at
1-800-242- 2121 or contact your local Avaya representative. If the equipment is causing harm to the
telephone network, the telephone company may request that you disconnect the equipment until the
problem is resolved.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord
and modular plug is provided with this product. It is designed to be connected to a compatible modular jack
that is also compliant. It is recommended that repairs be performed by Avaya certified technicians.
The equipment cannot be used on public coin phone service provided by the telephone company.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public
service commission or corporation commission for information.
This equipment, if it uses a telephone receiver, is hearing aid compatible.
Canadian Department of Communications (DOC) Interference Information
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This
is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that
registration was performed based on a Declaration of Conformity indicating that Industry Canada technical
specifications were met. It does not imply that Industry Canada approved the equipment.
Installation and Repairs
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities
of the local telecommunications company. The equipment must also be installed using an acceptable
method of connection. The customer should be aware that compliance with the above conditions may not
prevent degradation of service in some situations.
FIC Code SOC/REN
/
A.S. Code
02GS2 1.0A
02RV2-T AS.0
02LS2 0.5A
04DU9-BN 6.0Y
04DU9-DN 6.0Y
04DU9-IKN 6.0Y
04DU9-ISN 6.0Y
02IS5 6.0F
Network
Jacks
RJ11C
RJ11C
RJ11C
RJ48C
RJ48C
RJ48C
RJ48C
RJ49C